Netflow on IOS-XR

Moderators: Dante, Sarah

Post Reply
Felix
Posts: 4
Joined: Tue Oct 08, 2019 11:52 am

Netflow on IOS-XR

Post by Felix »

Hi all,
I have configured netflow on an ios-xr version
5.3.4, I have configured all parameters (flow
Exporter-map, flow monitor-map, sampler-map
and applied on a bundle interface.

The examples that I have seen is only applied on
Gigabit interfaces or ten gigabit, can anyone
Confirm if I can apply also on a bundle interface?
luke_bromirski
Posts: 8
Joined: Fri Oct 04, 2019 2:56 am

Re: Netflow on IOS-XR

Post by luke_bromirski »

Sure, nothing specific to his config:

Code: Select all

interface Bundle-Ether1.106
 flow ipv4 monitor Monitor_NAME sampler Sampler_NAME ingress
This is from 6.1, but with 5.3.4 it should be the same.
Felix
Posts: 4
Joined: Tue Oct 08, 2019 11:52 am

Re: Netflow on IOS-XR

Post by Felix »

Thanks, I will test again and check the results
Post Reply